Tape Player; Playing A Tape; Recording To Tape; From Radio - THOMSON TM9049 User Manual

Tape Player

Playing a tape

1. Slide the SOURCE SELECT switch to
OFF / TAPE.
2. Press STOP/EJECT to open the tape
deck door.
3. Insert a tape into the door and push the
door closed.
Attention: Attention:
Attention: Attention: Attention:
Be sure to slide the cassette into the tape
slot on the door. Do not place the tape
directly onto the tape mechanism.
4. Press REW or FWD to wind the tape to the
desired starting position. Press STOP/EJECT
to stop winding.
5. Press PLAY to start playback.
Press PAUSE to pause playback (press again
to release the button to resume playback).
Press STOP/EJECT to stop playback.
TM9049 EN

Recording to tape

From radio

1. Insert a tape into the deck.
2. Slide the SOURCE SELECT switch to RADIO.
3. Slide the RADIO BAND switch to select radio
band.
4. Rotate
be recorded.
5. Press REC and PLAY together to begin
recording.
6. Press PAUSE or STOP to pause or stop the
recording respectively.

From CD

1. Insert a tape into the deck.
2. Slide the SOURCE SELECT switch to CD.
3. Insert the disc to be recorded.
4. Select the track or program to be recorded.
5. Press REC and PLAY together to begin
recording.
6. Play the CD track or program to be recorded.
7. Press PAUSE or STOP to pause or stop
recording respectively.
13
TUNING to select the station to
Note: Note: Note:
Note: Note:
For better recording quality, use normal
bias tape (Type I) only.
1/7/05, 10:19 AM
EN
9