Enable Circle With Disney On Your Router - NETGEAR Nighthawk X6 AC3000 R7850 User Manual

Enable Circle With Disney on your router

You can enable Circle using the router web interface, but you must use the Circle app
to finish setting up your Circle account.
Before enabling Circle, make sure that your router is running the latest firmware and
that your router is in router mode. Your router must be in router mode to work with
Circle. You can't enable Circle if your router is in access point (AP) mode or bridge
mode.
To enable Circle with Disney:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Makes sure that your router is in router mode.
By default, the router is in router mode.
5. Make sure that your router is running the latest firmware.
6. Select BASIC > Parental Controls.
The Parental Controls page displays.
7. Set Circle with Disney to Enabled.
Note: You can only enable one parental controls service.
8. Click the Apply button.
The links to download the Circle app displays.
9. Download the Circle app on your mobile device.
10. Launch the Circle app and tap the LET'S GO button.
The Account Details page displays.
11. Complete the fields on the Account Details page and tap the CONTINUE button.
The Add Phone Number page displays.
12. Enter your cell phone number and tap the SEND CODE button.
Control Access to the Internet
Nighthawk X6 AC3000 Tri-Band WiFi Router
51 User Manual