Pioneer XV-DV580 Service Manual page 44

1
QQ
3 7 63 1515 0
A
ID Number Confirmation Mode
1 To enter ID Number Confirmation Mode after the ID number and
the ID data are set, press the ESC key then the STEREO key.
2 The ID number already set is displayed.
(It is also displayed on the FL display.)
3 Enter a 9-digit number for comparison. This is not required
when you only wish to check the ID number visually.
(The number is also displayed on the FL display.)
4 By pressing the CLEAR key without having input a number, you
can exit this mode. Each press of this key after a number has
been input deletes one digit.
B
[Player's ID Number Setting]
ID Number ?
0 0 0 0 0 0 0 0 1
2
Compare
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
3
<CLEAR> Exit
4
Input ID Number !
C
5 After entering all 9 digits, if you press the PLAY key, the unit
compares the number entered in Step 2 with the ID number
TE
L 13942296513
set, and only if the numbers match, the unit automatically exits
ID Number Confirmation Mode. If an ID data has not been
entered, the unit enters ID DATA Input Mode. If the numbers do
not match, the disc tray is opened, and the unit exits ID Number
Confirmation Mode.
Note: If you press the PLAY button before inputting a 9-digit ID
number, the unit returns to Step 4 without doing anything
else.
D
6 After entering all 9 digits, if you press the STOP key, the unit
compares the number entered in Step 3 with the ID number
set, and only if the numbers match, the unit automatically
deletes the ID number and exits this mode. If the numbers do
not match, the disc tray is opened, and the unit exits this mode.
(The STOP key is not accepted after all 9 digits have been
entered.)
[Player's ID Number Setting]
ID Number ?
0 0 0 0 0 0 0 0 1
Compare
E
0 0 0 0 0 0 0 0 1
<PLAY> Enter
5
<STOP> Memory Clear
6
Input ID Number !
www
F
44
1
http://www.xiaoyu163.com
2
x ao
y
. i
2
http://www.xiaoyu163.com
3
8
• Indication of an ID number already set
An ID number already set is displayed in the following cases:
1) When the ESC key then the CLEAR key are pressed, user
settings are cleared, then the ID number set is displayed on
the screen. In this case, the ID number is not displayed on the
FL display.
2) When the unit enters ID Number Confirmation Mode by your
pressing the ESC key then the CLEAR key, the ID number set
is displayed. In this case, the ID number is also displayed on
the FL display.
If you only need to confirm the ID number, you can exit
this mode by pressing the CLEAR key or turning off the power.
• Indication when no ID number is set
If no ID number is set, the message "No NUM" flashes on the
screen and FL display for a few seconds after the power is turned
on or during Stop mode.
Q Q
3 6 7 1 3
u163
.
XV-DV575
3
4
2 9 9 4 2 8
1 5 0 5 8 2 9 9 4
m
co
4
9 9
2 8 9 9