Navien KD One UHA-422SG/M User Manual page 16

Setting CAMERA NUM (setting the number of door-phones in line with the videophone)
*This is the mode that allows you to set the number of door-phones in line with the videophone.
*Set up as Door-phone 1 by default.
- Select [CAMERA NUM] from the [MANAGER] MENU using the "UP" and "DOWN" buttons .
If you push the "TALK" button, [CAMERA NUM] appears, which indicates the current setup.
- Select the number of door-phones to be connected with videophone using the "UP" and
"DOWN" buttons at the bottom, and then push the 'TALK' button.
- If you push the "TALK" button after completing the settings, the [MANAGER] MENU screen will
appear again.
Setting CAMERA TYPE (setting the type of the door-phone camera)
*This is a mode that allows you to set the type of the door-phone camera to be connected with
the videophone.
*Set up as PAL by default.
- Select [CAMERA TYPE] from [MANAGER] MENU using the "UP" and "DOWN" buttons, and then
if you push the "TALK" button, [CAMERA TYPE] menu appears, which indicates current setup
- Select the type of the door-phone camera to be connected with the videophone using the
"UP" and "DOWN" buttons at the bottom and then push the 'TALK' button
If you push the "TALK" button after the completion of settings, the [MANAGER] MENU screen
appears again.
The changed con guration will be applied only after power is OFF/ ON one time.
※ Caution: The camera must be connected that matches the con guration setup.
If you fail to do this, (e.g., connecting PAL camera while set up as NTSC) the screen image
may not appear correctly. Then, the screen is returned to the normal state when the power is
OFF → ON
16
[CAMERA NUM]
1 CAMERA
2 CAMERA
[CAMERA TYPE]
PAL
NTSC