Operation - Navien KD One UHA-422SG/M User Manual

OPERATI O N
When a visitor pushes a Call Button
■
When a visitor pushes the Talk Button on the door-phone at the front door, the call is
transferred to the Videophone
Call signal is ringing on
the Videophone, while
Talk LED is ickering, and
the image of the visitor
appears on the screen.
(approximately 30 seconds)
'DOOR#1' or 'DOOR#2' appears at the top of the screen
When using the Monitoring function
■
If you push the
"Monitoring" button,
pictures captured by the
door-phone at the front
door will appear on the
screen.
(maximum time: 1 minute)
'DOOR#1' or 'DOOR#2' appears at the top of the screen
If there's no signal from the door phone camera, the "No Signal" massage appears,
which means there is no video signal.
When "Talk" Button is
pushed, the conversation
with the Visitors starts,
and Talk Button LED
Illuminates.
(max. 1 minute)
If two door-phones are
installed, door-phone #2
can also be monitored by
pushing the "Monitoring"
Button one more time.
If you push the "Talk"
Button while talking with
the visitor or the time
limit of 1 minute is reached,
the screen goes blank and
the conversation ends.
If you push the "Talk"
Button while using the
monitoring function,
talking is enabled
through the door-phone
that is currently installed.
If you push the
"Door Open" Button,
the relevant door
opens and the
conversation ends
If you push the
"Door Open" Button
during monitoring, the
relevant door opens
and monitoring ends.
11