Using The Pen; Inserting Or Changing The Battery; Software Installation - Medion MD 85637 Manual

Using the Pen

Inserting or changing the battery

When you see disruptions in the input or when strokes are no longer recorded correctly the
battery of the digital pen is almost empty and should be changed.
The pen does not have an on/off-switch. It is activated automatically when it is moved close
to the input surface, and switches off when it is removed from the surface again.
1. Open the battery compartment by
turning the cap at the clip counter-
clockwise.
2. Remove the clip and take off the
battery lid.
3. Remove the spent battery and in-
sert a new AAA battery. Make sure
that the battery end marked "+"
points toward the pen tip and that
the other end marked "-" touches
the contact spring at the back.
4. Put the battery back on, reattach the clip and screw on the cap.
Note:
Read the instructions on the safe handling of batteries starting on page 3.

Software Installation

You can manage, edit and convert your notes and drawings with the software supplied.
You can also use the Graphic Tablet in combination with a compatible graphics program
such as "Paint".
8