Advertisement
Getting Started
To get setup and using your TI52 Bluetooth speaker please follow the
quick two step guide below;.
Step One:
Your TI52 will be supplied with some charge, so you can start using it
straight away. Carefully remove from the box and POWER ON the
speaker by pressing
button. The Bluetooth
button will begin
to flash BLUE. The blue indicating represents the speaker is searching
for an external device.
Step Two:
To pair a Bluetooth connection with the TI52 speaker you must have
a Bluetooth enabled device to connect and stream music from such
as a smart phone. Using your selected external device follow the
correct steps to open and search Bluetooth devices in range. Find,
Select and Connect to your speaker which will be labelled in your
search as TI52. Once a connection has been established the
button will beep and turn constant BLUE. Your audio
Bluetooth
data from your connect device can now be wirelessly streamed and
synchronised with the TI52 Bluetooth speaker.
Please note: If the Bluetooth connection is stable when speaker is
turned off, the speaker will automatically connect to the last
connected device.
Alternative AUX connection: If you wish to make a direct audio
connection please use the 3.5mm cable supplied to connect your
external device to the TI52 Bluetooth speaker.
For more detailed instructions please refer to General operations on
the follow pages.
5
Hide quick links:
Advertisement
