Advertisement
Maintenance
Clean the drill regularly. Before cleaning, remove the battery pack and any
accessories (bits etc.). To clean, use ONLY a mild soap and damp cloth on the
housing. Never immerse drill in any kind of fluid. Do not use any solvents or
harsh abrasives on the drill housing as this may cause damage to the unit.
Always keep the ventilation openings clear.
NOTE: All bearings in these tools are lubricated with a sufficient amount of
high-grade lubricant for the life of the unit under normal operating conditions.
No further lubrications required.
CAUTION: DO NOT keep the trigger switch pressed in with tape or any other
permanent means or the circuit will not function properly. A malfunction may
result possibly causing overheating or damage to the unit.
Do not open the drill, battery or battery charger. There are no user serviceable
parts. Opening the unit will void the warranty.
TROUBLESHOOTING TIPS:
DRILL DOES NOT WORK?
• Recharge the battery
CHARGING INDICATOR LED NOT ILLUMINATED DURING RECHARGING?
• Check that battery pack is properly connected to the battery charger
• Check that the AC Adaptor is properly connected at both ends
SPECIFICATIONS
Voltage
Speed 1
Speed 2
Torque Settings
Chuck Capacity
Charger Input
Charging Time
Battery Type
QUESTIONS?
If you have any questions about this product, please contact our Customer
Service Department at (888) 231- 4022, 9 am to 5 pm EST, Monday through
Friday or visit our website at: www.colemanpower.com.
Models: PMD8137
18V
0-400RPM
0-1100RPM
24 + Drill
up to 3/8"
120V AC 60Hz
Approx. 1 Hour
Ni-Cad
7
PMD8142
PMD8143
Owner's Manual
8
Advertisement
