IRISPen AIR 7 - Quick User Guide
Tip: when scanning to another application, you can minimize the IRISPen
the left arrow.
The interface then looks as follows on the left side of your screen:.
Scan Settings
A number of scan settings are available. Click the Settings icon to access them
Scan Type
Select the Scan Type. IRISPen
•
Text
When scanning Text to an application, IRISPen
and adds new scans on the same line in your application until the line is full. To start a
scan on a new line, click and slide the IRISPen
line, click again with the IRISPen
the default settings, see the topic Configuration.
•
Image
The Image option comes in handy to scan logos, signatures or mathematical formulas
for instance.
•
Numbers
When your documents contain numbers only, it recommended to activate the
Numbers option.
•
Table
The Table option is handy to scan text to Spreadsheet applications: open a spreadsheet
application and mouse click inside it. Click and slide the IRISPen
content is filled in in different cells in the application.
•
Barcode
The Barcode option is only available in the Windows version.
To scan a barcode, click and slide the IRISPen
barcode.
is able to scan the following types:
TM
. The cursor now moves to the line below. To modify
TM
interface by clicking
TM
.
by default adds a space after each scan
TM
over a line of text. At the end of the
TM
over a table line. The
TM
horizontally or diagonally over the
TM
7