Closing The Irispen™ Application; Powering Off The Irispen; Scanning Inside The Irispen™ Application - I.R.I.S. IRISPen Air 7 Manual

IRISPen AIR 7 - Quick User Guide
Closing the IRISPen™ application
To close the application, click the Settings icon (

Powering off the IRISPen™

To power off the IRISPen
Note: when the IRISPen
4.1 Scanning inside the IRISPen™ Application
In this section we provide more information on how to scan inside the IRISPen
Before you begin, make sure the IRISPen
Disconnected in the application screen.
•
Click the pen icon.
•
Click and slide the IRISPen
The recognized text is entered in the text field.
•
Repeat the previous step to scan additional lines.
Note that one line of text equals one scan.
•
To browse trough the scans, click the arrow buttons. The number of scans is indicated on the
left side of the arrows.
•
To add an additional scan, click the plus button. Then scan your line.
•
To delete scans one by one, click the x button. Or Ctrl-click it to delete all scans.
•
To copy-paste the current scan into another application, click the copy-paste icon
Ctrl-click it to copy-paste all scans.
Note: make sure you opened an application that supports your content.
•
To have the text read out, select the correct language and click Read aloud.
Note: make sure your computer is connected to the internet to use this feature.
•
To translate the text, click Translate. In the extra field that appears select the correct
translation language. The text is translated automatically.
Note: make sure your computer is connected to the internet to use this feature.
, rapidly click the scanning tips three times against a surface.
TM
is inactive for 12 minutes (at full battery), it auto powers off.
TM
is powered on and connected correctly. If not, it says
TM
over a line of text.
TM
) and select Close IRISPen .
TM
application.
TM
. Or
9