Braun Syncro 7540 Manual page 10

Syncro
10
Keeping your shaver in top shape
Automated cleaning
Available at your dealer or Braun Service Centres is the
Braun Clean&Charge. It automatically takes care of all
cleaning and lubrication needs of your shaver.
Manual cleaning
For easy cleaning after each shave, switch the shaver
off. Press the release buttons to lift the shaver foil
(do not remove the foil completely). Switch on the shaver
for approx. 5-10 seconds so that the shaved stubbles can
fall out.
For a thorough cleaning (weekly), remove the shaver
foil and tap it out on a flat surface. Using the brush,
clean the cutter block and the inner area of the pivoting
head. About every four weeks, clean the cutter block
with Braun cleaning agents.
If your skin is very dry and you notice a reduced operation
time of the shaver, apply a drop of light machine oil onto
the shaver foil.
Replacing the shaving parts
The shaver foil and cutter block are precision parts that,
in time, are subject to wear. A regular replacement of the
parts every 1
that you are getting the close, comfortable and quick
shave you expect from your Braun shaver. (Shaver foil and
cutter block: part no. 7000)
Preserving the cell unit
• In order to maintain the optimum capacity of the
7000
rechargeable battery, the shaver has to be fully dis-
7000
charged (by shaving) every 6 months approximately.
Then recharge the shaver to full capacity again.
This reconditions the rechargeable battery.
• Do not expose the shaver to temperatures of more than
50 °C for longer periods of time.
Accessories
• Wall holder
Fix the wall holder by means of the sticker foil (if necessary
with screw and wall plug) to a clean surface.
Available at your dealer or Braun Service Centres:
• Shaver foil and cutter block (key part no. 7000)
• 12 V cord (for cars or boats)
1
/ years, or when they are worn, will ensure,
2