Changing the door hinging
Refitting the lower door
Place door onto hinge pin from
above.
Close appliance door .
Insert middle hinge pin through
middle hinge plate into the bearing
bush.
Important. The lug on the hinge pin
must point backwards again and must
be guided into the groove on the hinge
plate.
94
Refitting the upper door
Place upper door onto middle
hinge pin and guide the upper
opening of the door on the hinge side
on to the door hinge.
Use your fingers to insert bolt into
the door bearing bush.
Screw in bolt (by approx. ¼ turn)
until it clicks into position.
Fit safety cover on to bolt .
The appliance door is not secure
until safety cover has been cor-
rectly fitted.