Profoon PAK-50 Installation And Setup page 98

Setsos1:?
Use this to receive a SMS informing you
which number is programmed as SOS
number 1. You can do the same for num-
bers 2 to 5.
Setsos:off
This function allows you to completely
deactivate the SOS function, in case you
prefer to only use the alarm button for the
two-button call function and for requesting
its location. Use Setsos:on to switch the
SOS mode back on again.
GPS settings:
Getpos:?
This function activates the GPS of the
alarm button. Within several minutes you'll
receive a SMS from the alarm button con-
taining a link to Google Maps indicating
the location of the alarm button.
98