Accustic Arts AMP I MK 2 Manual

To our valued customer and music enthusiast,
With the purchase of your stereo power amplifier AMP I – MK 2 from ACCUSTIC ARTS
opted for a product which incorporates the most modern technology to achieve excellent sound and
quality. To make sure that you have pleasure for as long as possible with your amplifier we kindly ask
you to thoroughly read this instruction manual through to the end.
We wish you many enjoyable hours of listening to music with your new unit.
SCHUNK AUDIO ENGINEERING – The home of ACCUSTIC ARTS
1 AMP I – MK 2 highlights

Stereo power amplifier with high output performance, also suitable for less efficient, impedance
critical and low ohm loudspeaker systems up to 2 

8 selected MOS-FET output transistors of highest quality

Magnetically shielded and encapsulated 600 VA toroidal core transformer for high output
reserves; separate windings for right and left channel

Very good smoothing thanks to more than 80.000 µF power supply capacity; Premium quality
capacitors ("Made in Germany")

Very high damping factor for perfect speaker control

Integrated protective circuit switches ascents off when clipping, HF oscillations or too high DC
offset occurs

Constant low operating temperature due to generously dimensioned heat sink integrated in
housing

Balanced input (XLR) and unbalanced input (RCA) – the inputs are switchable
 ®
ACCUSTIC ARTS
AMP I – MK 2 is "Handmade in Germany"
®
2
®
you have