Operating From The Function Display - Pioneer DVH-P5000MP Operation Manual

Section
08 Playing Video CDs
! Even without using an information display you
can start playback from a specified track. For
details, refer to Specifying track on page 34.
Selecting repeat range
You can choose between repeat play of a disc
or a track.
1 Move the joystick left or right to select
the repeat range option.
The repeat range option is highlighted.
2 Move the joystick up or down to switch
to the desired setting.
This switches you to the selected setting.
! Disc  Repeat the current disc
! Track  Repeat just the current track
Note
When repeat play of a Video CD disc is selected,
a menu may be displayed after playback depend-
ing on the disc.
Selecting audio output
You can switch between stereo and monaural
audio output.
1 Move the joystick left or right to select
the audio option.
The audio option is highlighted.
2 Move the joystick up or down to switch
to the desired setting.
This switches you to the selected setting.
! L+R  Left and right
! L  Left
! R  Right
36
En
All manuals and user guides at all-guides.com
Operating from the
function display
1
Repeat and pause functions can also be oper-
ated from the head units display.
1 Function display
Shows the function status.
2 RPT indicator
Shows when repeat play is turned on.
% Press F to display the function names.
Press F repeatedly to switch between the fol-
lowing functions:
RPT (repeat play)PAUSE (pause)
! During PBC (Playback Control) playback,
you cannot select RPT.
! To return to the playback display, press
BAND.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.
Repeating play
Repeat play lets you play the same track over
again.
1 Press F to select RPT.
Press F until RPT appears in the display.
2