Pausing Cd Playback; Using Its Playlists; Creating A Playlist With Its Programming; Playback From Your Its Playlist - Pioneer Super Tuner III D+ DEH-P7750MP Operation Manual

Section
07 Multi-CD Player
4 When you find the desired track (or
disc) press Multi-Control to turn scan play
off.
The track (or disc) will continue to play.
# If the display has automatically returned to
the playback display, select Scan mode again by
using Multi-Control.
Note
After track or disc scanning is finished, normal
playback of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of
the CD.
1 Use Multi-Control to select Pause.
Pause appears in the display.
2 Press Multi-Control to turn pause on.
Play of the current track pauses.
# To turn pause off, press Multi-Control
again.

Using ITS playlists

ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the
multi-CD player magazine. After you have
added your favorite tracks to the playlist you
can turn on ITS play and play just those selec-
tions.
Creating a playlist with ITS
programming
You can use ITS to enter and play back up to
99 tracks per disc, up to 100 discs (with the
disc titles). (With multi-CD players sold before
the CDX-P1250 and CDX-P650, up to 24 tracks
can be stored in the playlist.)
30
En
All manuals and user guides at all-guides.com
1 Play a CD that you want to program.
Push Multi-Control up or down to select the
CD.
2 Use Multi-Control to select ITS memo.
ITS memo appears in the display.
3 Select the desired track by pushing
Multi-Control left or right.
4 Push Multi-Control up to store the cur-
rently playing track in the playlist.
Memory complete is displayed and the cur-
rently playing selection is added to your play-
list.
5 Press BAND to return to the playback
display.
Note
After data for 100 discs has been stored in mem-
ory, data for a new disc will overwrite the oldest
one.

Playback from your ITS playlist

ITS play lets you listen to the tracks that you
have entered into your ITS playlist. When you
turn on ITS play, tracks from your ITS playlist
in the multi-CD player will begin to play.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Use Multi-Control to select
ITS play mode.
ITS play mode appears in the display.
3 Press Multi-Control to turn ITS play on.
ITS play mode appears in the display. Play-
back begins of those tracks from your playlist
within the previously selected
Magazine repeat or Disc repeat ranges.