Switching The Operation Mode; Use And Care Of The Remote Control; Installing The Battery - Pioneer GEX-P5700TV Operation Manual

Before You Start
% Press RESET with a pen tip or other
pointed instrument.
RESET button
Note
If you reset the microprocessor, memorized
broadcast stations and other information is
erased, and this unit returns to its initial
settings.

Switching the operation mode

This unit features two operation modes:
SRC : OSD OFF mode and SRC : OSD ON
mode. Switch the mode according to the com-
bined components.
SRC : OSD OFF mode
! Using with a Pioneer head unit featuring
an IP-BUS input.
! Not using this units OSD (On Screen Dis-
play) indications in the display.
SRC : OSD ON mode
! Using with a Pioneer head unit featuring
an IP-BUS input.
! Using this units OSD (On Screen Display)
indications in the display.
STAND ALONE mode
! This units STAND ALONE mode is a fea-
ture available in the future. This mode can
be used if the product compatible with this
units STAND ALONE mode is connected.
All manuals and user guides at all-guides.com
% Use a thin standard tip screwdriver to
switch the operation mode switch.
! After switching, reset the micro-
processor.
Use and care of the remote
control

Installing the battery

Slide the tray out on the back of the remote
control and insert the battery with the plus (+)
and minus () poles pointing in the proper di-
rection.
WARNING
Keep the battery out of the reach of children.
Should the battery be swallowed, immediately
consult a doctor.
CAUTION
! Use only one CR2025 (3 V) lithium battery.
! Remove the battery if the remote control is not
used for a month or longer.
! Do not recharge, disassemble, heat or dispose
of the battery in fire.
Section
02
7
En