Bissell BG10 10N2 Series User Manual page 5

Operations
Carpet cleaning continued:
7. Cleaning strokes. Release the trigger and make one slow
forward and backward pass over the same area to remove
any residual dirty water and aid in drying. Repeat cleaning
passes until solution being pulled up appears clean. Continue
passes without pressing the trigger until you can't see any
more water being pulled up.
8. Remove the dirty water tank by pulling the handle to the
upright position and lift up. Carry the tank like a bucket to
a utility sink or outside where you will dispose of the dirty
water.
9. Unlatch the top of the tank from the bottom by pushing the
handle all the way forward and lifting the top off. Pour dirty
water into the sink.
Note: You may notice hair and debris deposits
on the carpet or in the tank that were loosened
by the cleaning action (especially with newer car
pets that have never been deep cleaned before).
This debris should be picked up and thrown away.
10. Fill the clean water tank with clean hot tap water and follow
instructions 2 - 7 to continue cleaning.
CAUTION:
Do not overwet. Take care not to run over loose objects or edges of area rugs. Stalling brush may result in premature belt failure.
5 w w w. a s t o n i z e . c o m 7 8 0 . 7 0 1 . 5 1 1 2
8.
9.
9.