Auto Cue Function; Auto Ready Function; Incremental Playback; Call Function - Tascam CD-RW901 Owner's Manual

Auto Cue function

When the auto cue function is on, when a track is select-
ed, the point where sound begins (not where the track
begins) on that track is located, and the unit enters play-
back ready mode. Then, when the
playback begins at exactly that point.

Auto Ready function

This function allows the playing back a single track, and
the automatic cuing of the next track ready for playback.
Combained with Auto Cue function, the unit will enter
playback ready mode at the start of the next track.

Incremental playback

In this function, when the unit is in playback mode, and
when the key is pressed, the unit starts playback
PLAY
from the beginning of the next track.
Use the Menu option or the
remote control to set this mode on. The
will blink during playback or playback ready mode.

Call function

Call function allows the unit's playback position to
be returned to the point at which playback last started
from ready mode. If there is no "call point", an error
message will be displayed.
NoCall PT!!

End of disc/track message (EOM)

When nearing the end of a track or disc, the
tor will light up on the display.
The number of seconds (1 to 99) before the track/disc
end that the indicator is displayed can be set beforehand.
To set the message display time, use the EOM TRK
or EOM DISC options on the PLAY sub-menu (see

International Standard Recording Code (ISRC)

When in playback or playback ready mode, if the
key is pressed, the display shows "ISRC"
FAINALIZE
code on the screen. If there is no "ISRC" code on the

Recorder Identification Data (RID)

When in playback or playback ready mode, if the
key is pressed, the display shows "RID"
ERASE
code on the screen. If there is no "RID" code on the
4 − Playback operations
key is pressed,
PLAY
key on the
INC PLAY
indicator
TRACK
indica-
EOM
Press key on the front panel or remote con-
AUTO CUE
trol to set the function on. The
up.
Use the A_CUE LEVEL option to set the sound start
position detection level.
Press key on the front panel or remote
AUTO READY
control to set the function on. The
light up.
When the key is pressed, the unit will enter play-
STOP
back ready mode at the start of the next track.
NOTE
This function cannot be used with program, random
and MP playback mode.
"Operation basics" on page 16).
NOTE
This function cannot be used with MP playback
mode.
disc or the code has not been recorded on the disc,
will appears on the display.
Incomplete!
disc or the code has not been recorded on the disc,
will appears on the display.
Incomplete!
indicator will light
A.CUE
indicator will
A.READY

TASCAM CD-RW901