Subscribe to Our Youtube Channel
Related Manuals for 3M 870
Summary of Contents for 3M 870
- Page 1 RFID Tracking Pad Model 770 and Model 870 Owners Manual 3M Security Systems Division 3M Center, Building 225-4N-14 St. Paul, Minnesota 55144-1000 78-8123-7965-5 Rev B...
- Page 2 2003-2005 3M. All rights reserved. 3M is a trademark of 3M. 3M RFID Tracking Pad Owners Manual 78-8123-7965-5 Rev B...
-
Page 3: Table Of Contents
The 3M™ RFID Tracking Pad does not read tags ..............12 The read range for the 3M™ RFID Tracking Pad is reduced (less than 6 in.) ......13 The 3M™ RFID Tracking Pad does not always read all the tags placed on the Tracking Pad 13 Requesting service........................14 Before you call ...........................14... -
Page 5: Safety Information
THE INTENDED USE STATEMENT AND ALL SAFETY MESSAGES. Intended Use Statement The 3M RFID Tracking Pad Model 770 and Model 870 are designed and tested for use with other equipment and software to read and/or program 3M RFID Tags. These tags are used to identify files, folders, and other items such as books. -
Page 6: Safety Messages
Safety Messages We include safety messages and safety labels in this manual to help you protect your safety and the safety of others. This section contains important information to help you recognize and understand these safety messages. Safety message format Safety messages are designed to alert you to potential hazards that can cause personal injury to you or others. -
Page 7: Safety Messages Contained In This Manual
To reduce the risks associated with environmental contamination from circuit boards containing lead-bearing solder within the Tracking Pad and 3M RFID Reader, which, if not avoided, may result in minor or moderate injury: At the end of service life, dispose of the Tracking Pad, RFID Reader, and power supply according to federal, state, and local requirements. -
Page 8: Label Locations
RFID Reader Model 770 12 VDC 0,3 A FCC ID: DGF-SSD770 Canada __________ S/N: 770XXXX N1108 Model 870 12 VDC 0,3 A FCC ID: DGF-SSD770 Canada __________ S/N: 870XXXX N1108 RFID Tracking Pad This device complies with part 15 of the FCC Rules. -
Page 9: Emc, Usa, And Canada Compliance
NO MODIFICATIONS. Modifications to this device shall not be made without the written consent of The 3M Company. Unauthorized modifications may void the authority granted under Federal Communications Commission Rules permitting the operation of this device. -
Page 10: Section 1 - Overview
RFID Tags. Tracking Pad components The Tracking Pad includes the following components: 3M RFID Tracking Pad 3M RFID Reader Customer-supplied Computer Serial cable - connects the RFID Reader to a customer-supplied computer... -
Page 11: Computer Requirements
Serial port requirements The Tracking Pad is connected to your computer’s serial port. If your computer does not have a serial port, a USB-to-serial adaptor can be purchased and installed by your IT department. 3M does not provide USB-to-serial adaptors. Equipment specifications 3M™... -
Page 12: Section 2 - Installing The 3M™ Rfid Tracking Pad
Refer to the software user guide delivered with your system for instructions on how to install software and configure it for the Tracking Pad. Step 2 – Determine the optimal placement for the 3M™ RFID Tracking Pad and the 3M™ RFID Reader... -
Page 13: Step 3 - Connect The Hardware Components
The Tracking Pad has a 16 ft. (4.9 meter) connector. cable. If necessary, 25-foot (7.6-meter) extension cables are available from 3M (with the total length not to exceed 70 Power Transformer Cable Tracking Pad Cable ft. (21.3 meters). -
Page 14: Step 4 - Configure The Tracking Pad Software
Refer to the User Guide delivered with your system for instructions on how to set up the software for and test the Tracking Pad. Section 3 – Using the 3M™ RFID Tracking Pad Once the Tracking Pad is connected, refer to the User Guide delivered with your system for instructions on how to configure and use the Tracking Pad for your application. -
Page 15: Tag Reading Techniques
Tag reading techniques Using proper tag reading techniques helps ensure that the Tracking Pad reads all the tags on the items. Centering tags When you place items on the Tracking Pad, each Fan (separate) the tagged portion item’s tag should be roughly in the center of the pad. of the items so the tags do not directly overlap each other. -
Page 16: Section 4 - Troubleshooting
Section 4 – Troubleshooting The 3M™ RFID Tracking Pad does not read tags What to check Make sure that the items that you are trying to read are equipped with 3M RFID tags. Make sure that the RFID Reader’s Green Power Light is ON, indicating that the reader has power. -
Page 17: The Read Range For The 3M™ Rfid Tracking Pad Is Reduced (Less Than 6 In.)
The read range for the 3M™ RFID Tracking Pad is reduced (less than 6 in.) What to check Check to make sure that the Tracking Pad is at least two inches (15 cm) from any metal surfaces. Some locations may have hidden metal surfaces and components. Try moving the Tracking Pad to a different location to see if the read range improves. -
Page 18: Requesting Service
Requesting service Before you call Before you call 3M Service, have the following information available: Have the Tracking Pad connected with power applied and near the telephone. Write down the Tracking Pad’s serial number, located on the bottom of the Tracking Pad. -
Page 19: Section 5 - Care And Maintenance
Section 5 - Care and maintenance Cleaning the 3M™ RFID Tracking Pad The Tracking Pad may need occasional cleaning. Gently rub the Tracking Pad with a soft cloth dampened with a mild cleaning solution. DO NOT use any abrasive cleaners on the Tracking Pad.
Need help?
Do you have a question about the 870 and is the answer not in the manual?
Questions and answers