Sunbeam SB1800 Operating Instructions Manual page 7

7.
Pull both the bobbin and top thread toward the
back of your presser foot. (Figure 20)
Note:
Try a practice stitch before beginning to sew
to make sure you've threaded the machine
correctly.
How to sew
1.
Turn the hand wheel counter-clockwise till the
needle is at its highest position. (Figure 21)
2.
Lift the presser foot. Place the fabric beneath
the presser foot at exact spot where you want
to begin sewing. (Figure 22)
3.
Lower the presser foot onto the fabric. (Figure
23) Select a stitch pattern. Make sure the
power switch is ON. Lower the needle into
the fabric. Press down on the foot control and
begin sewing. The sewing speed depends on
the pressure applied to the paddle: the harder
you press, the faster the needle moves. Guide
the fabric gently with your hands.
4.
When done, switch the power OFF.
5.
Turn the hand wheel anti-clockwise till the
needle is at its highest position. Lift the
presser foot. Gently ease the fabric away from
beneath the presser foot.
6.
Snip the threads with the thread cutter. (Figure 24)
Note:
Do not touch the pattern selection knob while the machine is
running.
Sewing Machine Instructions
Figure 20
Figure 21
Figure 22
Figure 23
Figure 24
Page 7