Specific Safety Rules - Promaker PRO-SD480 User Manual

Store idle power tools out of
the reach of children and do not
allow persons unfamiliar with the
power tool or these instructions
to operate the power tool. Power
tools are dangerous in the hands of
untrained users.
Maintain power
for misalignment or binding of
moving parts, breakage of parts
and any other condition that may
affect the power tool's operation.
If damaged, have the power
tool repaired before use. Many
accidents are caused by poorly
maintained power tools.
Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are
less likely to bind and are easier to
control.
Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of the
power tool for operations different
from those intended could result in
a hazardous situation.
Hold power tools by insulated
gripping surfaces when performing
an operation where the cutting tool
may contact hidden wiring or its own
cord. Contact with a "live" wire will
make exposed metal parts of the tool
tools. Check
"live" and could give the operator an
electric shock.
Service
Have your power tool serviced by
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.

SPECIFIC SAFETY RULES

WARNING:
cordless screwdriver. Do not plug
in the charger until you have read
and understand this Instruction
Manual. Learn
applications and limitations, as
well as the specific potential
hazards related to this tool.
Following this rule will reduce the
risk of electric shock, fire, or serious
injury.
Always wear eye protection.
Any power tool can throw
foreign objects into your eyes and
cause permanent eye damage.
ALWAYS wear safety goggles (not
glasses) that comply with ANSI
safety standard 287.1. Everyday
glasses have only impact resistant
lenses. They ARE NOT safety
glasses.
WARNING: Glasses or goggles
not in compliance with ANSI Z87.1
could cause serious injury when
Know your
the tool's
5