Focal K2 POWER 100 KP User Manual page 7

Fine tunning / set-up
Tweeter level adjustment
Adjustments to the tweeter level, can
be made at precise increments, using
the selector buttons found inside on
the PCB board of the crossover.
These are indicated as -1dB, -2dB and
-4dB. By pushing in one or several of
these selector buttons, allows various
reductions of level, from -7dB total by
1dB increments (fig. M).
Tweeter level adjustment table
-1dB -2dB -4dB
0 0 0
1 0 0
0 1 0
1 1 0
0 0 1
1 0 1
0 1 1
1 1 1
Midrange level adjustment
The crossover contains a specific
level adjustment for the midrange
frequencies.
Fitting the drive units high up in the
vehicle requires the mode " Mid flat "
to be used. Doing so will ensure the
overall response curve of the system
remains linear (fig. O, A and fig. P).
Fitting the drive units low in the
vehicle, especially in the bottom of the
door for example, requires the mode
"Mid High" to be used. Doing so will
ensure such normally directional
frequencies are not "masked" or lost
in the textiles of the vehicle (fig. O, B
and fig. P).
Your Focal-JMlab product was developed and manufactured with high-quality materials and components
which can be recycled and/or re-used. This symbol indicates that electrical and electronic equipment must be
disposed of separately from normal garbage at the end of its operational lifetime.Please dispose of this product
by bringing it to your local collection point or recycling centre for such equipment. This will help to protect the
environment in which we all live.
All manuals and user guides at all-guides.com
Staging level adjustment
The radiused-profiled wave-guides
on the exterior of the TN52 tweeter,
can control the directivity of the high
frequencies. Thereby, the acoustic
energy available can be controlled
by the orientation of this radiused
profile. This characteristic essentially
adds further benefit to the user, to
control the staging of the system, or
defining better the virtual acoustic
imaging of the sound produced.
By simply turning the tweeter and
Total
changing the position of the radiused
profiles, will modify this staging
0dB
aspect (fig. N).
-1dB
Running-in period
-2dB
K2 Power drive units use the very
-3dB
latest components. To ensure such
complex mechanical elements work
-4dB
in harmony with each other, they
must be allowed to function correctly
-5dB
in this environment. Such changes
-6dB
in temperature and humidity are
regarded as very hostile. For K2 Power
-7dB
speakers to benefit, a running-in
period must be used to ensure they
are prepared for this. We recommend
that once the system is ready for
listening the drive units should be
run-in with medium volume setting,
with music that has the full bandwidth
of frequencies (sub-bass through to
treble). This running-in period should
be used for a few weeks, to gain the
full potential. After which the excellent
performance of your K2 Power
products can be fully appreciated.
Information of other K2 Power
products
Focal-JMlab offer a range of sub-
woofers from the 13 KS (130mm/5")
to the impressive 46 KX4 (460mm/18")
Consult your dealer for
information.
Conditions of guarantee
All Focal loudspeakers are covered
by guarantee drawn up by the official
Focal distributor in your country.
Your distributor can provide all
details concerning the conditions of
guarantee. Guarantee cover extends
at least to that granted by the legal
guarantee in force in the country
where the original purchase invoice
was issued.
futher
07