Advertisement
2.3 Plug adapter with on/off switch
Commissioning:
Put the connector into the unit.
Put power plug in (230V 50 Hz)
Safety arrangement:
Micro fuse T 200mA, 250 V
2.4 Users and servicing personnel
are responsible for operating, transporting, installing and cleaning the unit as well as for eliminating
malfunctioning.
The unit must only be operated by properly trained authorized staff.
•
It must be decided who is responsible for operating the unit and adhered strictly to rule out uncertainly
•
regarding the safety aspects.
The operating instructions must be heeded during all working procedures (operating the unit, cleaning,
•
fitting spares or accessories).
The cleaning procedures and those for fitting spares and accessories are described in the instructions so
•
as to be understood by anyone trained in electronics or electricians.
The user must remain from everything which risks the safety of this unit.
•
The user must ensure that only authorized staff operates this unit.
•
The user is obliged to report any changes in the unit which may adversely affect its safety to the
•
operator.
The operator is obliged to ensure that the unit is only ever operated in perfect condition.
•
2.5 Safety precautions where installed
The „POWER CLEAN" professional denture cleaning must stand firmly
Before connecting the unit to the power supply, ensure that the timer is switched 0 – OFF.
•
Select installation location in a way that the power cable is long enough.
•
The power cable should not impede working procedures.
•
2.6 Emission
Noise level: < 68 dB (A)
The adapter has an on/off power switch (1/0)
with a red indicator lamp, which lights up
when voltage is switched on.
By switching off the adapter, it is ensured that
the machine as well as the power supply are
disconnected from the power source.
Advertisement
