Operating The Lcd Display; Display Settings - Lectric XP Owner's Manual

Operating the LCD Display

Turning the bike ON/OFF
Increase Pedal Assist Level
Decrease Pedal Assist Level
Turn ON/OFF front/rear lights
Toggle Odometer, Trip A, Trip B, Voltage,
Current, Trip timer (TM)
When the bike has not been used for 10 consecutive minutes the display will automatically shut
down.The pedal assist and throttle features will no longer work when the display is turned off.

Display Settings

To change display settings hold the up and down arrows simultaneously to enter into the
advanced settings menu. In this menu clicking the mode button will toggle between each
numbered setting. To adjust the value of each setting click the up and down arrows accordingly.
Setting
P01
P02
P04
P08
Function
Brightness
Distance Units
Sleep
Speed Limit
Hold the mode button until the display turns
on
Press up arrow button
Press down arrow button
Hold the up arrow button for 3 seconds until
lights turn on, repeat to turn off
Press and let go of the mode button
Default
1
1
10
32
Explanation
Backlight display
brightness. The
darkest level is 1, the
brightest level is 3.
Distance Units. 0: KM;
1: MILE.
LCD Display sleep
timer. With the default
setting, the display will
turn off after it has not
been used for 10
minutes.
Speed limit. Range is
0-100.
The input data here
represents the
20