Do you have a question about the XP and is the answer not in the manual?
Questions and answers
syeve howrey
January 29, 2025
lectric dual batttery bike. Batteries are freshly charged. Display won't turn on. 100 miles on bike.
1 comments:
Mr. Anderson
February 10, 2025
Possible reasons the display won't turn on for the Lectric XP after charging the batteries include:
1. Poor Battery Connection – Ensure the battery is properly locked in place and the key is in the "ON" position. 2. Discharge Plate Issue – The discharge plate, which connects the battery to the bike, may have a faulty connection. Check for loose or dirty connections. 3. Controller Connection Problem – The controller, located behind the discharge connector, may have loose connections or carbon deposits. Inspect and clean as needed. 4. Solder Joint Issues – Poor solder joints on the controller can prevent power from reaching the display. Repair may be necessary. 5. Defective Controller or Display Unit – If other troubleshooting steps fail, replacing the controller and display unit may resolve the issue.
If the bike is under warranty, Lectric customer service may provide a replacement for free. Otherwise, replacements are available for a fee.
This answer is automatically generated
Enrique
April 8, 2025
My xpress750lectricebike does nothing at all with a full chargedbatt.
1 comments:
Mr. Anderson
April 9, 2025
The Lectric XP 3.0 electric bike may not turn on despite showing a fully charged battery because the battery may not be supplying any voltage. This could be due to an internal battery issue, even if the display shows charge remaining. Replacing parts like the display, battery connections, and controller did not resolve the issue, suggesting the battery itself may be faulty internally.
This answer is automatically generated
Sue A Williams
May 1, 2025
Charge is full and turns on but throttle won't go why ?
Need help?
Do you have a question about the XP and is the answer not in the manual?
Questions and answers
lectric dual batttery bike. Batteries are freshly charged. Display won't turn on. 100 miles on bike.
Possible reasons the display won't turn on for the Lectric XP after charging the batteries include:
1. Poor Battery Connection – Ensure the battery is properly locked in place and the key is in the "ON" position.
2. Discharge Plate Issue – The discharge plate, which connects the battery to the bike, may have a faulty connection. Check for loose or dirty connections.
3. Controller Connection Problem – The controller, located behind the discharge connector, may have loose connections or carbon deposits. Inspect and clean as needed.
4. Solder Joint Issues – Poor solder joints on the controller can prevent power from reaching the display. Repair may be necessary.
5. Defective Controller or Display Unit – If other troubleshooting steps fail, replacing the controller and display unit may resolve the issue.
If the bike is under warranty, Lectric customer service may provide a replacement for free. Otherwise, replacements are available for a fee.
This answer is automatically generated
My xpress750lectricebike does nothing at all with a full chargedbatt.
The Lectric XP 3.0 electric bike may not turn on despite showing a fully charged battery because the battery may not be supplying any voltage. This could be due to an internal battery issue, even if the display shows charge remaining. Replacing parts like the display, battery connections, and controller did not resolve the issue, suggesting the battery itself may be faulty internally.
This answer is automatically generated
Charge is full and turns on but throttle won't go why ?