Sanyo CLT-2410 Instruction Manual page 5

All manuals and user guides at all-guides.com
CLT2410 (SANYO) A5 2nd
Connections
Connect the base unit
1
Mounting the base unit on a wall
Standard wall plate mounting
This phone can be mounted on any standard tele-
phone wall plate.
1
7/18/00 6:41 PM Page 5
1
Snap the bottom bracket into the notches on the base.
2
Connect the AC adaptor to the DC IN 9V jack and to a standard 120V
AC wall outlet. Then raise the antenna to a vertical position.
3
Connect the telephone line cord to the TEL LINE jack and to a tele-
phone outlet.
2
To AC outlet
AC adaptor
(supplied)
3
To telephone outlet
Telephone line cord
(supplied)
When connecting the power cord, make sure it does not create a
trip or fire/electrical hazard. Avoid places where it could become
chafed.
1
Snap the bottom bracket into the notches on
the base.
2
Plug the telephone line cord to the TEL LINE
jack and the AC adaptor to the DC IN 9V jack.
3
Plug the telephone line cord into the tele-
phone outlet.
4
Fit the AC adaptor cord into the molded chan-
nel. Then wrap the cord around the strain
relief notch.
2 - 7
5
Plug the AC adaptor into a standard 120-V AC
wall outlet.
6
Raise the antenna to a vertical position.
7
Align the mounting holes on the base with the
mounting posts on the wall plate. Push in and
down until the phone is firmly seated.
E4
To DC IN 9V
To TEL LINE
Use only the AC adaptor that is sup-
plied with your phone.