Advertisement
InstructIons
bulb replacement
Only replace the bulb when the lamp has not been in operation for at least an hour and the bulb
assembly is no longer hot to the touch. Unscrew the two halves of the head light at about the
mid-point. Remove the bulb assembly by gripping the outer edge of the reflector and pulling
directly ahead in the direction of the bulb. Preferably hold the replacement bulb on the outside
of the reflector with a clean rubber glove or with a clean cloth. Be sure to insert the bulb into the
socket carefully so as not to damage any pins. Do not touch the bulb or the inside of the reflector
with your hands as this may deposit skin oils and damage the performance of the lamp.
Replacement Bulb
P/N 623469
lens replacement
Unscrew the Lens Replacement Bezel
from the lamp head.
Screw in the new Lamp Replacement Bezel.
Lens Replacement Bezel
P/N 623478
3624 West Lake Avenue
Glenview, Illinois 60026
1-847-657-5300 Fax:1-847-657-5218
www.magnaflux.com
:
Line up 2 lugs
with slots in
socket to
properly insert
bulb
Zb-12
Zb-12 t
s
•
•
•
replacement parts
Battery Charger
P/N 623471
echnical
pecifications
Electrical Requirements—Charger:
110v – 240v
Typical UV Intensity @ 15" (38 cm):
Exceeds 1000 microwatts/cm2
Typical White Light emission:
Less than 2 Foot-Candles
Battery Pack
P/N 623470
Advertisement
