Changing The Security Codes; Restricting Calls - Panasonic EB-GD35 Operating Instructions Manual

Phone Security

Changing the Security Codes

1 From Idle mode press B 8 to enter the Security menu
2 Use e to select Phone Lock, PIN or PIN2
3 Use f until Change
B
4 Enter the current code and press B
5 Enter the new code and press B
6 Verify the new code and press B

Restricting Calls

Call Barring
This function is SIM dependent. Call Bar is used to restrict certain
outgoing and/or incoming calls. Call Bar is controlled by a security
password supplied by your Service Provider. When updating or
checking the status of Call Bar the phone must be registered with a
network.
1 From Idle mode press B 82 to enter the Call Bar menu
and press B
2 Use e to select the level of call barring that you want to apply
and press B
3 Enter Call Bar password and press B
Barred Dialling
This function is network dependent. Barred Dial enables you to bar
all phone numbers pre-programmed in the SIM from being dialled on
the phone. To use this function PIN2 is required.
From Idle mode press B 86 and press B to enable
Barred Dial , enter PIN2 and press B
18
is displayed in main option area and press