Body; Neck; Pickups - Peavey Cirrus Operating Manual

C
onstruction
B o d y
The body of this instrument is offered in two versions
of the finest woods available in a three piece grain
matched Mahogany or a Walnut with Bubinga Top.
The deep double cutaway design provides unimpelded
access to the highest fret while the extended upper
horn balances the instrument, thereby avoiding the
need to support the instrument with the left hand. The
Cirrus features our hand-rubbed oil/ultra satin finished.
N e c k
The neck is available in Walnut with a wedge finger-
board (Graphite Reinforced) both 4 and 5 string models
are equipped with a two away adjustable steel Torsion
Rod. A 12" radius; 24" fret and 34" scale. Fingerboard
on 4 string model, 15" radius; 24 fret and 35" scale fin-
gerboard on 5 string model.

Pickups

Each Cirrus instrument comes equipped with two inter-
nally active VFL
increases the amount of signal-to-noise and produces a
brilliantly strong signal over a wide frequency spec-
trum. The sensitivity level of each pickup may be
adjusted by raising or lowering the pickup with height
adjustment screws. Raising the pickup closer to the
strings will increase sensitivity and lowering the pickup
(away from the strings) will decrease the sensitivity.
4
All manuals and user guides at all-guides.com
pickups. The low impedance output
™