Remote Control; Battery Installation; Effective Distance Of The Remote Control Transmitter - Memorex MVUC821 User Manual

BATTERY INSTALLATION

Follow these precautions when using a battery in this device:
1. Warning–Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
2. Use only the size and type of battery specified.
3. Be sure to follow the correct polarity when installing the battery as indicated next to the battery
compartment. A reversed battery may cause damage to the device.
4. If the device is not to be used for a long period of time, remove the battery to prevent damage or
injury from possible battery leakage.
5. Do not try to recharge a battery not intended to be recharged; it can overheat and rupture. (Follow
battery manufacturer's directions.)

EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER

All manuals and user guides at all-guides.com

REMOTE CONTROL

1. Remove the Battery Compartment by pressing in on the tab and
pushing out.
2. Install a CR2025 battery, paying attention to the polarity diagram in
the Battery Compartment.
3. Replace the Battery Compartment.
BATTERY PRECAUTIONS
30 30
10
20ft
NOTES:
• When there is an obstacle
between the unit and the
transmitter, the transmitter may
not operate.
• When direct sunlight,
incandescent lamp, fluorescent
lamp or any other strong light
shines on the REMOTE
SENSOR of the unit, the
remote operation may
unstable.
an
be