Advertisement
Concept
FEATURES CR300/400
34
35
36
40
39
44
45
46
37
38
41
42
47
48
GRAPHIC EQ:
A 9 band graphic equaliser
34
allows the userto compensate for house
acoustics.
REVERB TO MAIN:
35
of reverb to the main outputs.
36
REVERB TO MON:
sent to the monitor out.
37
MASTER MONITOR: Controls
level of the signal sent to the monitor out.
38
MASTER VOLUME:
listening volume of the amplifier.
FX SEND:
Controls the level of signal sent to
39
external processing equipment connected via
the FX send and return sockets.
40
FX TO MAIN:
Controls the level of FX return
signal sent to the master outputs.
41
FX TO MONITOR:
return sent to the monitor output.
42
PHANTOM POWER:
provided for condenser microphones. It is
globally switched to all MIC XLR sockets via a
switch on the back panel. Phantom power
source must always be switched OFF when
using unbalanced sources connected to the
MIC inputs otherwise the source may be
damaged. Condenser microphones should be
connected to MIC inputs before the phantom
power is switched on.
POWER:
LED indicating that the unit is
43
powered up.
FX SEND:
Jack socket provided for
connecting external processing devices. Level
44
of signal present at this socket controlled by 19
for individual channel level and 39 for the over
all master level.
45
FX RETURN:
Jack socket provided to accept
the return signal from external processors.
46
REVERB FOOTSWITCH:
of an FS1 for remote switching of reverb.
MONITOR OUT:
Sends mixed monitor signal
47
to external power amplifier or additional
powered monitor
LINE OUT:
Sends master signal to external
48
power amplifiers or additional powered
Adjusts the overall level
Adjusts the level of reverb
the output
Controls the overall
Controls the level of FX
48V phantom power is
Allows connection
CR Manual
Advertisement
