Memorex MDF0153 1.5IN Trio Series Operation User's Manual page 6

GETTING STARTED (CONTINUED)
6. To delete a picture, select it and then click Delete.
7. To delete all pictures, click Clear.
8. To rotate a picture, select it, then click Rotate.
9. To edit a picture (only pictures added can be edited), select it and then
click Edit. Click and drag a portion of the picture as desired. The picture
may not fit the screen (128 x 128 pixels). It depends the portion you click
& drop.
10. When editing the picture, click Smooth
Edit to smooth out the picture.
Click Lock Style and the selection will
default to a perfect square. This will
allow you to take a portion of the
picture and make it fit exactly into this
frame's screen.
Click Auto Stretch so the picture will
stretch to fit the display.
After selecting the box, click on the picture at the left of the window to see
the effect.
11. Set Auto Power Off Time (the time the unit will stay on before turning off if
no button is pressed) in the Auto Time Power Off (Min.) box. Set to "0"
and the unit will stay on until turned off using the POWER button.
Note: Auto Power Off function will not work during playback of the slide show.
12. Click Exit to exit the ImageViewer or click Save to save the new pictures
and settings to the player. If Exit is selected before saving the pictures,
the pictures and settings will not be saved.
13. When finished saving and exiting the ImageViewer, you can follow the
"Safely Remove Hardware" procedure as shown on the next page.
NOTE: When the photos are loaded into the unit, they will appear at the
original ratio. This means there may be black bars at the sides or top of the
picture.
All manuals and user guides at all-guides.com
6