Dip Switch Settings; Installation - usa-spec BT45-FORD1 Product Manual

Text information on radio display:
Since the BT45-FORD1 is using the SATELLITE function of your Ford
radio, the option to see the song title, artist name and Album title is
available. While your music plays, short-press the TEXT button
repeatedly to cycle between the different TEXT fields (i.e. artist, album
and song). The default text display is song-title.
Note: some radios have the TEXT option on preset number 6. Pressing
and holding down the TEXT/PRESET-6 button for too long will result in
the BT45FORD1 switching into AUX mode.

DIP SWITCH SETTINGS:

Set the dip switches to : 1-ON, 2-ON, 3-ON, 4-ON (down = ON)

INSTALLATION:

Eject all CD's from the CD6 radio mechanism to prevent
•
jamming the CD mechanism when the radio reboots.
• Disconnect the negative battery terminal for safety purposes
only.
Remove the radio and disconnect all the plugs, locate the 16-pin
•
Satellite radio plug found on the back part of the radio-chassis.
Use the BT-F24C cable (included in package) to connect the
•
male 16-pin and 24-pin connectors of the BT-F24C harness into
the radio.
Reconnect the factory 16-pin and 24-pin plugs into the female
•
16-pin and 24-pin plugs of the BT-F24C harness.
Run the BT-F24C 3.5' long cable to the desired mounting
•
location, preferably an easily accessible one.
• Connect the 18-pin black Molex of the BT-F24C cable into the
BT45-FORD1 plug labeled "RADIO".
Connect the included microphone to the "MIC" jack of the
•
BT45-FORD1 and run the 5-meter long cable to any of the
recommended locations. See "Recommended Microphone
Locations" diagram.
3