Siemens SL45 User Manual page 78

76
Problem
Voice mail does not
work.
h
Message “ “.
Message cannot be
sent.
Function cannot be
set.
Charge counter does
not work.
PIN error
Phone code error
Service Provider code
error
Too few/too many
menu entries
No fax possible
Damage
Severe shock
Phone exposed to moi-
sture
All manuals and user guides at all-guides.com
Troubleshooting
Possible causes
Call diversion not set
Message store full
Service Providers do not support this
service.
Phone number of the Service Centre is
not set or is set wrongly.
SIM card contract does not support this
service.
Service Provider overloaded
Addressee does not have
a compatible phone.
Not supported by Service Provider or re-
gistration required.
Charge pulse not transmitted.
Three wrong entries
Three wrong entries
No authorization for this service.
Functions may have been added or re-
moved by your Service Provider via the
SIM card.
Incorrect settings in the PC.
No authorization for this service.
WrongWindows infra-red driver.
Remove battery and SIM and insert them again. Do not dismantle the phone.
Remove and dry battery and SIM card. Dry immediately with cloth; do not heat. Dry
connector contacts thoroughly. Stand unit upright in an air current. Do not dismantle
the phone.
Possible corrective measures
Set call diversion
(see page 54).
Delete a message to make room
(see p. 43).
Check with your Service Provider.
Set Service Centre (see page 44).
Contact your Service Provider.
Repeat message.
Check.
Contact your Service Provider.
Contact your Service Provider.
Enter the MASTER PIN (PUK) provided with
the SIM according to the instructions. If
MASTER PIN or PIN has been lost, contact
your Service Provider.
Contact Siemens Service (see page 72).
Contact your Service Provider.
Check with your Service Provider.
Check settings, see p. 68.
Contact your Service Provider.
Replace Windows infra-red driver/contact
your PC supplier.