Midi Control Section; Filter Envelope Modulation Section; Key Response Section - Tascam GVI Owner's Manual

MIDI CONTROL SECTION

Invert: When enabled, this setting reverses the incoming MIDI controller data values.
Resonance Controller: This parameter allows you to assign a MIDI controller to the Filter
Resonance for real-time continuous control. This assignment overrides the Filter Resonance
value, which will be disabled once you assign a MIDI controller here.
FILTER ENVELOPE MODULATION
I nvert: When enabled, this setting reverses the incoming MIDI controller data values.
A ttack, Decay, and Release depth: These sliders allow you to enable MIDI control of Filter
Envelope parameters. Enabling these parameters allows the specified MIDI Modulation
Controller to affect one, two, or all three parameters at once and with varying intensity fo

KEY RESPONSE SECTION

Velocity (Vel) Dynamic Range:
the response of the Filter Velocity Curve.
N ote: Please see the Velocity Response Section for diagrams of each Velocity Curve type.
Key Tracking: Enabling Key Tracking scales the Filter Cutoff frequency based on key position
relative to the assigned Breakpoint value. With this feature, you can have the filter go from dark
to bright as you play from one end of the keyboard to the other.
Break Point: Adjust this value to set the breakpoint for the filter Keyboard Tracking. Range is
from 0-127 with a default value of 60 (Middle C).
Cutoff Controller: This parameter allows you to assign a MIDI
controller to the Filter Cutoff Frequency for real-time continuous
control. This assignment overrides the Cutoff Frequency value,
which will be disabled once you assign a MIDI controller here.
SECTION
Controller: Th
allow external MIDI control of the Attack, Decay and
Release of a regions Filter envelope. Use the
Controller drop-down menu to choose the MID
controller from the list of standard MIDI controlle
Velocity (Vel) Curve: This parameter allows you to
select how filter parameters respond to the incoming
Note On velocity of each region. You can choose
between Linear, Non-Linear and Special curves.
With this setting, you can lower or raise the dynamic range of
19
e Filter Envelope Modulation controls
I
rs.
r each.