Looping.a.selected.passage - Tascam MP-BT1 Quick Start Manual

3–Playing back tracks
Looping a selected passage
1. Press the Á/π key to start playback.
2. Press the key at the point where you
I/O
want the loop to start (IN point).
3. Press the key again at the point where
I/O
you want the loop to stop (OUT point).
Loop playback starts immediately from the
IN point.
To stop loop playback press either the
or the key.
I/O
If you press the
LOOP
points are kept, so you can play the same loop if
you press the key again.
LOOP
If you press the key, the loop IN and OUT
I/O
points are cleared.
1
TASCAM MP-BT1
LOOP
key, the loop IN and OUT
key