Table of Contents
Advertisement
Flash Modes and Modelling
14
Maximum Flashes in Strobe mode:
Flash
Hz
Output
1/4
1/8
1/16
1/32
1/64
1/128
1/256
TTL
In TTL mode the camera determines the flash output by metering light levels through
the lens. To enter TTL mode press the MODE button until TTL is displayed on the LCD
screen.
TTL Flash Exposure Compensation
Flash Exposure Compensation allows to you make adjustments to the flash power level
as determined by the camera in TTL mode. The flash output can be adjusted by ±3
f-stops in 1/3-stop increments.
To adjust the Flash Exposure Compensation in TTL mode:
1.
Press the Rotary Control Dial to select Flash Exposure Compensation.
2.
Turn the Rotary Control Dial to adjust the compensation level.
3.
Press the Rotary Control Dial to set the desired compensation level.
Further information:
•
In TTL mode XMT units can be divided into a maximum of three groups.
•
Flash ratios of XMT units in different groups can be adjusted (up to a max of 3 groups).
•
In TTL mode different flash modes can be used on different groups.
Modelling Lamp
The XMT500 uses a 10W LED modelling lamp. Modelling output can be adjusted in four
steps including Off, 30%, 60%, and 100%.
To use the modelling lamp:
1.
Press the LAMP button to scroll through the modelling output options.
1
2
3
4
7
6
5
4
14
14
12
10
30
30
30
20
60
60
60
50
90
90
90
80
100
100
100
100
100
100
100
100
5
6-7
8-9
10
4
3
3
2
8
6
5
4
20
20
10
8
50
40
30
20
80
70
60
50
100
90
80
70
100
90
80
70
11
12-14
15-19
10-50
2
2
2
2
4
4
4
4
8
8
8
8
20
20
18
16
40
40
35
30
70
60
50
40
70
60
50
40
60-100
2
4
8
12
20
40
40
Hide quick links:
Advertisement
Table of Contents
