Important Safety Information - Farad Super3 Owner's Manual

WARNING: There are no user serviceable parts inside. Refer all servicing to qualified service per-
sonnel.
WARNING: To reduce the risk of fire or electric shock, be sure that the apparatus shall not be
exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be
placed near or on the apparatus.
Do not allow foreign objects to get into the enclosure. If the unit is exposed to moisture, or a for-
eign object gets into the enclosure, immediately disconnect the power cord from the wall. Take
the unit to a qualified service person for inspection and necessary repairs.
Read all the instructions before connecting or operating the component. Keep this manual so you
can refer to these safety instructions. Heed all warnings and safety information in these instruc-
tions and on the product itself. Follow all operating instructions.
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
Do not place the unit on a bed, sofa, rug, or similar surface that could block the
heatsink airflow. If the component is placed in a bookcase or cabinet, there must
be ventilation of the cabinet to allow proper cooling. Keep the component away
from radiators, heat registers, stoves, or any other appliance that produces heat.
The unit must be connected to an ac power source only of the type and voltage specified on the
rear panel of the unit as described in the chapter AC power input on page 6. Connect the power
supply to the power outlet only with an earthed IEC power supply cable or an exact equivalent in
a mains socket with protected earthing connection.
The primary method of isolating the device from the mains supply is to disconnect the mains plug.
Ensure that the mains plug remains accessible at all times. Unplug the AC power cord from the AC
outlet if the unit will not be used for longer time.
Do not attempt to defeat grounding and/or polarization provisions. Do not use extension cords.
Do not route the power cord where it will be crushed, pinched, bent at severe angles, exposed to
heat, or damaged in any way. Pay particular attention to the power cord at the plug and where
it exits the back of the unit.
Immediately unplug and stop using the component and have it inspected and/or serviced by a
qualified service agency if:
- The power supply cord or plugs have been damaged.
- Objects have fallen or liquid has been spilled into the unit.
- The unit has been exposed to rain.
- The unit shows signs of improper operation.
- The unit has been dropped or damaged in any way.
- When the product exhibits a distinct change in performance. This indicates a need for
service.
When replacement parts are required outside the guarantee period, be sure the service techni-
cian has used replacement parts specified by the manufacturer or have the same characteristics
as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
Upon completion of any service or repairs to this product, ask the service technician to perform
safety checks to determine that the product is in proper operating condition.
In households with small children, an adult should provide supervision until the child is capable of
following all the rules essential for the safe operation of the unit.

Important Safety Information

3