Introduction To The Cd-Rw4U; Connections - Tascam CD-RW4U Owner's Manual

Connections

The following should be noted when you connect the
unit to other equipment. See "Switching to audio
mode" on page 10 for details of connection to a com-
puter using USB.
NOTE
Do not connect or disconnect audio or other equipment to
or from the CD-RW4U while power is supplied to the units.
Always turn off the power when connecting or disconnect-
ing units.
1 3 5 7 8
2 4 6
I G H J K
9
2 – Introduction to the CD-RW4U
It is possible to connect the unit's
I
and analog LINE IN
same time. However, the unit can receive signals
from only one input at a time.
Audio signals output from the unit are output simul-
taneously from the unbalanced
as well as from the
DIGITAL COAXIAL OUT
A EF
B D
C
L
G
COAXIAL IN
to other equipment at the
J
LINE OUT jacks,
G
.
13
TASCAM CD-RW4U