Lubrication - Philips HD8829 Manual

Type of usage
Low
Normal
Heavy
-
Make sure the lever is in contact with the base of the brew group.
14 Make sure that the locking hook of the brew group is in the correct
position.
-
To position the hook correctly, push it upwards until it is in uppermost
position.
-
The hook is not correctly positioned if it is still in bottommost position.
15 Slide the brew group back into the machine along the guiding rails on the
sides until it locks into position with a click.
Caution: Do not press the PUSH button.
16 Close the service door.

Lubrication

For optimal performance of the machine you have to lubricate the brew
group. See table below for the lubrication frequency. For support visit our
website: www.philips.com/support.
Nr of daily products
1-5
6-10
>10
1 Switch off the machine and unplug it.
2 Remove the brew group and rinse it under a lukewarm tap as described
in section 'Weekly cleaning of the brew group'.
3 Apply a thin layer of grease around the shaft in the bottom of the brew
group.
English
Lubrication frequency
Every 4 months
Every 2 months
Monthly
23