Advertisement
– Care should be taken to arrange the cord so that it will not be
tripped over or pulled.
– DANGER. To avoid possible electric shock, special care should
be taken since water is employed in the use of aquarium
equipment. For each of the following situations, do not attempt
repairs yourself; discard the appliance.
• If the appliance shows any sign of abnormal water leakage,
immediately unplug it from the power source.
• Do not operate any appliance if it has a damaged cord or plug, or
if it is malfunctioning or if it is dropped or damaged in any manner.
connecting the aquarium appliance to a receptacle. The "drip loop"
is that part of the cord below the level of the receptacle, to
prevent water travelling along the cord and coming in contact with
the receptacle.
• If the plug or receptacle does get wet, DON'T unplug the cord,
disconnect the fuse or circuit breaker that supplies power to the
appliance. Then unplug and examine for presence of water in
the receptacle.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Safety instructions
Keep these operating instructions in a safe place.
For indoor use only. For use with aquariums.
• To avoid the possibility of the appliance
POWER
plug or receptacle getting wet, position
SUPPLY
CORD
aquarium stand and tank to one side of a
wall mounted receptacle to prevent water
from dripping onto the receptacle or plug.
DRIP
LOOP
A "drip loop", shown in the figure, should be
arranged by the user for each cord
Read the operating and safety instructions carefully and
comply with all instructions prior to operating this device.
Advertisement
