Canon VIXIA HF M30 Firmware Update Procedure page 10

6. Touch the [Firmware] version number to display the firmware update confirmation screen. Touch [OK] to
start the f irmware update. After a short while, the f irmware will be overwritten with the new
version. (The update takes approximately 4 minutes.)
[1.0.0.0 -> 1.0.2.0]
[1.0.1.0 -> 1.0.2.0]
The firmware update takes approximately four minutes to complete. During this time, please do
not turn off the camcorder or operate any of its controls. Doing so could cause camcorder
malfunctions.
7. After the update ends, the camcorder will automatically restart, and a screen that shows the
new f irmware version will appear for about four seconds.
Firmware updated
Version 1.0.2.0
8. All of the settings will be reset, and the time and date screen will appear. Please set the date and time.
9. Please operate the camcorder as described in Step 2, "Check the firmware version on your
camcorder", to confirm that the firmware version has changed.
10. Turn off the camcorder, and then remove the SD (or SDHC) memory card.
11. This completes the firmware update.
After the firmware update is completed, make sure to follow Step 4-1 to 4-7 to completely
initialize the SD (or SDHC) memory card that was used to copy the firmware before using the
memory card. Also, please delete the firmware you downloaded from your computer.
Caution
Caution
10