Table of Contents
Advertisement
MENU DISPLAY
A. VOLUME DISPLAY
B. VOLUME LEVEL Displays the volume level.
NOTE: Lock mode overrides power mode.
C. POWER MODE
Displays the power control mode for the amplifier. No
display if FRONT PANEL power control mode is select-
ed. NOTE: Only the volume level can be adjusted while
on the main menu screen.
MENU FUNCTION SCREEN
1. Press the selection knob to enter the function sub menu.
2. Turn the selection knob to cycle through each sub menu option.
3. Press the selection knob to adjust the menu function.
4. An arrow (greater-than symbol) will appear when levels can be adjusted.
5. Press the selection knob again to exit the adjustment menu and turn the
knob to advance to the next sub menu function.
6. Once reaching the last option in the function sub menu, press to exit to
the main menu.
NOTE: The sub menu will scroll continuously in both directions. To exit, scroll
either direction until reaching the "Menu Exit" screen and press the knob.
A. CROSSOVER: 40Hz–250Hz/LFE
Selects the low pass filter for the amplifier
NOTE: Set LFE when using the LPF on an AVR. DEFAULT: LFE
B. SPEAKER EQ: FLAT/CSIW SUB 10/CSIW SUB 28/CWS8/CWS10
Selects the EQ mode for the amplifier.
FLAT: 0 reference setting (unmodified sound).
CSIW SUB 10/CSIW SUB 28/CWS8/CWS10: Preset EQ
optimized by subwoofer type.
DEFAULT: FLAT
C. PHASE: 0–315° (45° steps)
Contours subwoofer performance to match speaker performance and
acoustic environment.
DEFAULT: 0°
A
C
D
D. NIGHT MODE
Displays if night mode is ON. No display if night mode
is OFF.
E. SOUND MODE
Displays the current sound mode setting. No display if
sound mode is set to BYPASS.
Press
B
E
Selector Knob
Turn
Arrow
Advertisement
Table of Contents
