Table of Contents
Advertisement
Status
MicroSD Card
Error
Too High
Temperature
Too Low
Temperature
Printer Head
Cooling
Low Battery
Very Low
Battery
Firmware
Updating
Operation
Cannot write data into MicroSD Card
Remarks : If MicroSD Card Error
and Device is Printing, printing
LED signal will still ON, until
printing is nished, LED will
change to Magenta ashing again
When device temperature is
too high
When device temperature is
too low
Checking with the printer head
temperature and letting is cool
down before printing
When power level down to 20%
When power level down to
very low (?%)
When the device is updating
rmware
LED Indicator
Magenta
Red (Until temperature
back to normal)
Cyan (Until temperature
back to normal)
Cyan (Looping)
White -> Red (Looping)
Red -> White (Looping)
White
14
Advertisement
Table of Contents
