Install The Dust Cover; Operate The Record Clamp; Level Your Delphi - Oracle DELPHI MK III Owner's Manual

...install the dust cover

Remove the protective packaging from around the dust cover.
-
Attach the hinges using a philipps screw driver.
-
Slide the flaps in the hinges bases secured to the acrylic base.
-

...operate the record clamp

Tighten the clamp so the record is pushed flat against the mat.
-
Note 1: This will be achieved before feeling the clamp is tight.
Note 2: An overtightened record clamp will force the edge of the record to lift off too much.

...level your Delphi

Your turntable is now ready to be moved to its final emplacement. It is most probable that the
level will differ with the location where the turntable was set up.
Level the acrylic base by turning the levelling feet. Use the subchassis spirit level to achieve
-
this final adjustment since the relative level has been already been established between the
subchassis and the acrylic base.
Delphi MKIII
Owner's manual