Polarized Plug - Philips HR2380 User Manual

Make sure the appliance is unplugged when not in use, if left unattended,
20
before assembling or disassembling, cleaning or storing. Always ensure
the Pasta Maker is completely assembled before inserting plug into power
outlet and operating. The Pasta Maker will not operate unless properly
assembled.
Keep hands, hair, clothing, as well as spatulas and other utensils away from
21
appliance during operation to reduce the risk of injury to persons, and/or
damage to the Pasta Maker.
Do not place hands, fingers or utensils in the mixing chamber of the
22
appliance unless the appliance is unplugged and the motor and mixing
paddle have come to a complete stop.
Do not put your fingers or other objects into the Pasta Maker opening while
23
it is in operation. Avoid contacting moving parts.
Do not attempt to defeat the cover interlock mechanism.
24
To prevent a short circuit or an electric shock, do not pour water or any
25
liquid into the safety switch.
The shaping discs and all detachable parts of the appliance are dishwasher
26
safe. When you clean them in a dishwasher, make sure to set the
temperature below 600C (1400F).
Do not insert any objects into the device.
27
Do not pour any liquids into the safety switch hole.
28
To better protect the lifetime of the appliance, we recommend to stop the
29
device for 15 minutes, if it was used for 45 minutes continuously"
If you intend to use the appliance continuously, clean the shaping disc with
30
the supplied cleaning tool each time after use. For cleaning ease, do not
soak the shaping disc into the water directly.
Never pour water into the mixing chamber before you place the chamber lid
31
onto the chamber.
Do not select the extrusion only program before the dough mixing is
32
complete. Otherwise, this will damage the pasta maker.
Clean the appliance each time after use, or the appliance might not operate
33
properly.
SAVE THESE INSTRUCTIONS

POLARIZED PLUG

This appliance has a polarized plug (one blade is wider than the other). To reduce the
risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not modify the plug in any way.
ENGLISH
7