Table of Contents
Advertisement
Identifier
Status
装回扬声器
警告: 拆装计算机内部组件之前，请阅读计算机附带的安全信息，并遵循拆装计算机内部组件之前中的步骤。拆装计算机
内部组件之后，请遵循 拆装计算机内部组件之后中的说明。有关其他最佳安全操作信息，请参阅
regulatory_compliance
Identifier
Status
Procedure
注: If the rubber grommets are pushed out of the speakers when removing the speakers, push them back in place
before replacing the speakers.
1
Using the alignment posts and rubber grommets, place the right speaker in the slot on the palm-rest assembly.
2
Holding the tab on the right speaker, rotate the right speaker into place and secure it using the alignment posts.
3
Route the speaker cable through the routing guides on the palm-rest assembly.
4
Using the alignment posts and rubber grommets, place the left speaker in the slot on the palm-rest assembly.
5
Holding the tab on the left speaker, rotate the left speaker into place and secure it using the alignment posts.
6
Connect the speaker cable to the system board.
GUID-40DC76F7-B3EC-450A-848E-632D68C352E2
Translated
上的 Regulatory Compliance（管制标准）主页。
GUID-20286750-2B67-424E-860B-BBC3F5758ECD
In Translation
www.dell.com/
51
Advertisement
Table of Contents
