Honeywell BW Technologies GasAlert MicroClip XT User Manual page 37

Factory Gas Alarm Setpoints
Standard factory alarm setpoints may vary by region.
To disable an alarm, set the alarm setpoint to
Manager II. Refer to Using Fleet Manager II to Configure the
Detector for complete instructions.
Shop for Gas products online at:
Note
Note
(zero) in Fleet
CanarySense
www.
Changing Alarm Setpoints
Stopping a Gas Alarm
If alarms are set to latch, press
a
.ca
GasAlertMicroClip
Note
to reset the alarms.
C
1.800.561.8187
Alarms