Honeywell BW Technologies GasAlert MicroClip XT User Manual page 25

Calibration Gas Concentration
Shop for Gas products online at:
a
CanarySense
www.
Calibration Interval
Bump Interval
BW recommends to bump test the sensors before each day's
use to confirm their ability to respond to gas by exposing the
detector to a gas concentration that exceeds the alarm setpoints.
Verify that the audible and visual alarms activate. Calibrate if the
readings are not within the specified limits.
.ca
GasAlertMicroClip
Sensor Configuration
a
Note
1.800.561.8187